IT-GS Technical Products - Air filters for the painting technology

Filter boxes high efficient Fiter boxes of this typ have a very high paint collection capacity, until 36kgs.On the incoming side it is made with several shifts of carton material and on the backside there is a syntetik filter in addition. This method availables a high efficiency filtering quality while a very high air flow. This filter system is available in different version. The air flow can be until 4500m³ per hour. We deliver these filters ready to use.
Floor filter R3-300 Fields of application Filter mats made for the fine dust filtration of the sucking air in ventilation and air conditioning systems, which need a very high clairity grade. Very effective as rough dust filter in a more steps-air system, also as diffusion floor filter in an industry spraying cabin. The R3-300 is combining a very high dust collecting capacity with a low pressure difference. Therefor it is very cost effective and has a long economic life time. Media The filter mat syntetic based will developed and produced in our own hightech-media factory. The filter media, which is made of well choosen and no-breakable high tech seam will constucted in some layers, which will be more and more compressed and result a very high dust collecting capacity by having a low demage of pressure, plus gravimetric separation grade and degree of efficiency acc. EN-779. The R3-300 is thermic bunded and stabilized, for a high dust collecting capacity. The clean air side is smoothed for a correct installation, as cut, roll or pocked filter and for a easy identification the type is labeled. This filter mat is also available as media for the confection of products for advanced filters for the surface technology, like cartridge filters fold filter units or pocket filters. The R3-300 is according all fire rules of the European Union (DIN 53438-F1). The independent quality control acc. EN 779 plus the individual DIN-Logo and type label is printed on the clean air side of all rolls, realizes a stabil quality together with the F5-classification .
Floor filter RA560G(F5) Fields of application High quality card web filter media of synthetic seam, progressive build, clean air side sealed and smoothed. In addition the fine filter media are special equiped fully adhasive and has a filter net on the clean air side. The type of the filter are labeled as "RA 560G". Proofed for using as fine filtration in air technology devices and applications. Mostly used in painting lines and spraying cabins.
Floor filter RA600(F5) Fields of application Filter mats made for using in spraying cabins and drying cones as final barrier contra all particles in the sucking air of painting lines. It provides a balanced air distribution in spraying cabins, which are in use in car mounting factories and repairing devices. Media This filter mats based on syntetic seam would developed and produced in our own high tech factory. The filter media are made of no-breakable high tech seam and arranged in some degreasing close by layers, results a very high dust colection capacity with a low demage of pressure. This filter media are thermic bunded and the complete filter is impregnated with a special glue, where a release of seam particles is not possible while a vibration of a machine, also by difference of the temperature. The clean air side is compressed and smoothed and by the type RA-600 G increased with a gitter seam. The result is a long life time of the filter plus a high fraction separation by having a high dust collecting capacity plus low energy and maintainance costs. This filters agrees with all fire rules of the European Union plus of USA (DIN 53438-F1) and are self-extinguishing. It is consistent contra solvent and also 100% free of silicone. The independent quality control acc. EN 779 plus the individual DIN-Logo plus the type label , with that all rolls on the clean air side are labeled, can we realizze a constant quality together with the F5-classification.
Overspray separator FA 200G and FA 400G Overspray separators of this type consists of high tech fiber seam for the separating of overspray. The special structure availables a high overspray collecting capacity. According the laminate in condition of a high seam compression, what is placed on the disperse side, realizzes a very high overspray collection by all paint and colour types. Overspray separators ar not burnable acc. DIN 4102. This filter media will be uses in the automotive area, several years ago.
Carton labyrinth filter - overspray separator The carton labyrinth filter consists of two walls of folded and on the fold glued carton. The therfor reached labyrinth efect makes it to the best air filter of this kind. According the relevant advantages af the centrifugal force is draining the standard carton labyrinth filter overspray, which will happen by spraying of paint, asphalt, glue, resin, fiber, tar, teflon, oil, fat, liquid food, and more. From its construction and stucture need the Andreae Standard filter only 1/16 of its available area for the transport. The collection of paint particles outer of the air stream is reducing the increasing of the air stream opposition and availables the carton labyrinth filter a 3 to 5 times so long life time compared to other floor filter systems.
Rogh dust filter RSB-290/300 (G3-G4) Fields of application The RSB-filter mats are made for the rogh or pre filtering of the incoming air in clima of air conditioning systems of buildings, offices, fabric buildings and other applications. It realizze a balanced dust separation in areas with a high air volume or hard contaminated ambiants air. The serie RSB is combining a high dust collecting capacity with a low demage pressure. Therefor it is very cost efficiency. Media The filter media are made of no-breakable high tech seam and arranged in some degreasing close by layers, results a very high dust collecting capacity with a low demage of pressure, plus a very high separating ratio. This filter media are thermis bunded and increased, to realizze a very high dust collecting capacity. The clean air side is signed with a print to baware you for a mistake by the mountage. This filters agrees with all fire rules of the European Union plus of USA (DIN 53438-F1) and are self-extinguishing. The independent quality control acc. EN 779 plus the individual DIN-Logo and the sign of the type, what all is printed on the clean air side, together with the G2-, G3- or G4-classification realizze a constant quality.
High capacity-fine filter cartridges type RK 480 (F5) The filter consists of fiber and syntetic fiber shifts. It has a solid frame of carton and covered with a perforated metal plate on the clean filter side. The incoming air side is closed with a gossamer.
High capacity-fine filter cartridge type RQ 480 (F5) filter construction like RK 480, however made with elastic carton frame, which will be pressed from 20mm (delivery size) to 4 mm (crushing frame).
Filter cartridge Z-line This media serie consists of very fine, high elastic syntetic textile fiber in a stabil carton cell frame. The depth folded filter element has an extrem large filter surface and it is placed in a wide seamed base grid. High capacity-Z-Line cartridges are available in standard measurement and also in special dimmensions with a frame from 25 to 150 mm, with carton frame or alternative with aluminium frame as special version and in classes of EU 4 (G4) til EU 6 (F6).
horse hair- / rubber hair filter mat RM 600 Fiber shift air filter mat consists of a mix of textil fiber and animal hair, which gives a very stabil filter shift. Able to deliver only in cuts with a maximal size of 1.000 x 2.000 mm. Further sizes are available in larger quantity also in thickness of 20, 40 mm.
High-temperature filter cartridge type RAK 200 (F5) This filter will be in use in the painting area and in the drying cone. It consists of two layers of fiber with a aluminium frame on both sides. Fields of application In industry drying ovenwith extreme high temperatures.
High temperature filter cartridge Type RAK 300 (G4) This filter will be in use in the painting area and in the drying cone. It consists of two layers of fiber with a aluminium frame on both sides. Fields of application In industry drying ovenwith extreme high temperatures.
Paper filter mats RPA I + II Filter mats of recycling paper will be used in overspray separating devices with dry suction. It availables a high separating ratio and at the same time it are able to reduce the costs according long term use. Some layers of paper results together a very high separating area, when it is according small holes possible, that the outgoing air stream can go thrue. According the increasing reduction of the holes will close the holes on the front at a slower rate as that on the back side and realizzes a stabil air passage. Therefor it will be reached a ballanced using of the layers of paper and the air stream is still balanced. That availables a high collecting capacity and a long term using. Compared to fiber mats the life period of the RPA-filter is three to four times. The RPA II will delivered with a ynthetic fiber vlies on the outgoing air side. Therefor it is able to filter particles, that was going dry in the air stream and you can reach a separating grade of 98 tol 99,9%.
Trockenschichtfilter Dieses syntetische Filtermedium ist ein sehr festes und rubustesPolyester-Faser-Vlies mit progressivem Aufbau. Zur Zuluft- und/oder Umluft-Grobstaubfiltration in lufttechnischen Geräten oder Anlagen. Speziell gut geeignet zur Grobstaubfiltration von Farbspritzkabinen und Lackieranlagen aller Art und Hersteller. Technische Daten: Mittlerer Abscheidegrad nach EN779: 87% Nennvolumenstrom: 2.500 - 10.000m³/h m² Anfangsdruckdifferenz: 14 - 88 Pa Enddruckdifferenz: 250 Pa Filterklasse nach DIN 24185: EU3 (G3) Temperaturbeständigkeit bis 70 °C Feuchtigkeitsbeständig: 100% Staubspeicherfähigkeit: 535g /m² Farbe: weiss Materialdicke: 20mm Brandverhalten: selbstverlöschend nach DIN 53438 Kl. F1/K1 Lieferform: Zuschnitt max. Abmessung: 1000x1500mm